1mm Thickness Flange Inner Ring Cold Roll Forming Machine
Introduction of Locking Clamp Ring Roll Forming Machines
1. Introduction of the ring clamp: It consists of a shallow
integral v-flange retainer and two bands for positioning and
securing the selected closure type. The ring clamp is light in
weight and compact in structure, which is widely used in various
industrial sectors to pull and fix two circular flanges. Compared
with the v-clamp, the ring clamp is a low-cost clamping solution.
2. Introduction of our machines: Two V-shaped flanges are produced
by one-step roll forming and cut to at the end of the machine. We
adopt frequency converter motor or servo motor to control speed,
PLC and HMI to control flanges length and quantity.
Main Configurations of Flange Ring Clamps Cold Roll Forming
Machines
| No | Items | Qty | Remark |
| 1 | De-coiler | 1 set | |
| 2 | Straightening Machine | 1 set | |
| 3 | Roll Forming and Cutting Device | 1 set | |
| 4 | Guarding Cover | 1 set | Optional |
| 5 | Control System | 1 set | |
Flange Ring Clamps Cold Roll Forming Machine Working Process
Decoiler ------ Leveling (Straightening) ----- Roll Forming and
Cutting
Technical Parameters of Main Devices
| No | Items | Technical Requirements |
| 1 | Equipment Floor Area | 12×2.5×2(L×W×H)M |
| 2 | Feeding Direction | From Right to Left |
| 3 | Voltage | 380V,50Hz,3 Phase (according to countries) |
| 4 | Air Supply | Flow Rate:0.5m³/min; Pressure: 0-0.7MPa |
| 5 | Hydraulic Fluid | 46# |
| 6 | Gear Oil | 150# |
| 7 | Material of Strip | Stainless Steel |
| 8 | Width of Strip | ≤80mm |
| 9 | Thickness of Strip | ≤2mm |
| 10 | Rolling Speed | 15 components/minute |
| 11 | Total Power | Around 25KW |
| No | Items | Technical Parameters |
| 1 |
De-coiler
| Width of Strip | 30-100mm； |
| Thickness of Strip | ≤2mm； |
| Inner Diameter of Coil | ф480-520 mm(according to customer’s requirements)； |
| Outer Diameter of Coil | φ1300mm；Loading Weight:≤1T |
| Expand Way | Manual |
| Power | 3 KW |
| 2 | Straightening Device | Width of Strip | 30-100mm； |
| Thickness of Strip | ≤2mm； |
| Motor Power | 1.5 KW |
| Speed | Max16m/min |
| Roller Arrangement | 7 rollers |
| Arrange mode | 4-Point Independent |
| 3 | Roll Forming | Forming Stations | 8 Stations |
| Type of Driven | Gear |
| Forming Rack: | The roller is adjusted by digital display. |
| Station Pitch | 200mm |
| Max. Feeding Width of Coil | 100mm |
| Max. Thickness of Material | 2mm |
| Diameter of Shafts | Φ50mm ,42CrMo (quenching and tempering) |
| Material of Roller | Cr12,Hardness: HRC58-60° |
| Main Driven Motor | 15KW |
| Bending and Cutting Devices | 1 set |
| Turkey Head Device | 1set |
| 4 | Guarding | Usage and characteristics | Safety protection device mainly aims at two parts of the
protection, one part of the main forming machine protection, the
use of aluminum profiles and transparent plexiglass, electrical
control, etc. for the main forming machine safety protection; the
other part of the automatic material rack and leveling position
protection, the use of aluminum profiles and wire mesh for the
overall protection of the equipment with only one outlet. |
Flanges Ring Clamps Roll Forming Machine Pictures Details
FAQ
Q: What's your payment terms?
A: 30% as the deposit by T/T in advance, 70% as the balance payment
by T/T after you inspect the machine and before shipping.
Q: What is your delivery?
A: After we received your 30% payment, we will arrange the
production. About 60 to 75 working days for delivery.
Q: Do you supply the coils?
A: No. We only provide roll forming machines.
But we will give you the contact information of our long-cooperate
coil factory. You contact them directly. In this way, you can get
the right coil and get the best price.
